Colani: Tekst vervangen - ".JPG" door ".jpg"

2024-11-21T01:54:49Z

Tekst vervangen - ".JPG" door ".jpg"

Nieuwe pagina

{{Short description|Bounding anti-personnel mine}}
{{Redirect|Bouncing Betty||}}
{{Infobox weapon
|name=S-mine 35
| image= S-mine.jpg
| image_size = 300
|caption=An American [[paratrooper]] demonstrates the process of removing a live S-mine. On the left is a [[Mark I trench knife]].
|origin=Germany
|type=bounding
[[anti-personnel mine]]

|is_explosive=yes

|service=1935–1945
|used_by=Germany, [[Axis Powers]], Finland, [[Viet Cong]]
|wars=[[World War II]], [[Winter War]], [[Continuation War]], [[Vietnam War]]
|designer=
|design_date=
|manufacturer=
|unit_cost=
|production_date=1935–1945
|number=1,930,000+
|variants=SMi-35, SMi-44

|weight={{convert|4.1|kg|lboz|abbr=on}}
|length=
|part_length=
|width=
|height={{convert|127|mm|in|0|abbr=on}}
|diameter={{convert|102|mm|in|0|abbr=on}}
|crew=

|filling=[[TNT (explosive)|TNT]]
|filling_weight={{convert|182|g|lboz|abbr=on}}
|detonation=Various, including:<br />S.Mi.Z 35 (pressure),<br />Z.Z.35 (pull),<br />Z.U.Z.Z. (pull and tension),<br />E.S.Mi.Z (pressure and electric)
|yield=
}}
The German '''S-mine''' (''Schrapnellmine'', ''Springmine'' or ''Splittermine'' in German), known by enemy [[Allies of World War II|Allied Forces]] as the "'''Bouncing Betty'''" on the [[Western Front (World War II)|Western Front]] and "'''frog-mine'''" on the [[Eastern Front (World War II)|Eastern Front]], is the best-known version of a class of mines known as [[bounding mine]]s. When triggered, these mines are launched into the air and then [[detonated]] at about {{convert|1|m|ft|0|spell=in}} from the ground. The explosion projects a lethal spray of [[Shrapnel shell|shrapnel]] in all directions. The S-mine was an [[anti-personnel weapon|anti-personnel]] [[Land mine|mine]] developed by Germany in the 1930s and used extensively by German forces during [[World War II]]. It was designed to be used in open areas against unshielded [[infantry]]. Two versions were produced, designated by the year of their first production: the SMi-35 and SMi-44. There are only minor differences between the two models.<ref name="TM-E">US War Department Technical Manual TM-E 30-451: Handbook on German Military Forces, 1945 (Ch. VIII, Sec. V.5.a-b). [http://www.lonesentry.com/manuals/tme30/ch8sec5sub5.html (available online)]</ref>

The S-mine entered production in 1935 and served as a key part of the defensive strategy of the ''[[Wehrmacht]]''. Until production ceased in 1945, Germany produced over 1.93 million S-mines.<ref name="JTV">JTV. [http://www.jaegerplatoon.net/landmines2.htm Finnish Army 1918–1945], last updated 12 March 2005.</ref> These mines inflicted heavy casualties and slowed, or even repelled, drives into German-held territory throughout the war. The design was lethal, successful, and often imitated.

== History ==
[[French army|French soldiers]] encountered the S-mine during minor probes into the German [[Saarland|Saar]] region on September 7–11, 1939, during the [[Saar Offensive]]. The S-mine contributed to the withdrawal of these French incursions.<ref name="Sloan">Lieutenant-Colonel C.E.E. Sloan, ''Mine Warfare on Land'', Brassey’s, London, 1986.</ref> The mine's performance in the Saar region affirmed its effectiveness in the eyes of the German leadership and prompted the United States and other countries to copy its design.<ref name="Ingraham">Lieutenant-Colonel John Ingraham & Col. Dalton Jones. ''Technical Intelligence Bulletins'' 8(5), 2003. [http://www.wlhoward.com/id556.htm (available online)] {{Webarchive|url=https://web.archive.org/web/20151212171644/http://www.wlhoward.com/id556.htm |date=2015-12-12 }}</ref> After their experience, the French nicknamed the mine "the silent soldier".

[[Nazi Germany]] used the S-mine heavily during the defense of its occupied territories and the German homeland during the Allied invasions of [[European Theatre of World War II|Europe]] and [[North African Campaign|North Africa]]. The mines were produced in large numbers and planted liberally by defending German units. For example, the German Tenth Army deployed over 23,000 of them as part of their defense preparation during the [[Allied invasion of Italy]].<ref name="Huebner">*Klaus H. Huebner, ''Long Walk Through War: A Combat Doctor's Diary'', Texas A&M University, College Station, 1987.</ref>

S-mines were deployed on the beaches of [[Normandy]] in preparation for the anticipated invasion as part of a general program of heavy mining and fortification. On the [[Îles Saint-Marcouf|Îles-St.-Marcouf]], just off [[Utah Beach]], where Allied planners believed the Germans had established heavy gun batteries, [[Erwin Rommel]] had ordered S-mines to be "sown like grass seed."<ref>Cornelius Ryan. ''The Longest Day.'' New York: Simon and Schuster, 1994, {{ISBN|0-671-89091-3}}, p. 162–163.</ref> To build the [[Atlantic Wall]], Germans deployed millions of mines of various types, anti-personnel mines (such as the S-mine), dug hundreds of kilometers of trenches, laid barbed wire, and constructed thousands of beach obstacles.<ref>[[Stephen E. Ambrose]]. ''D-Day, June 6, 1944: the climactic battle of World War II''. New York: Simon & Schuster, 1994, {{ISBN|0-671-67334-3}}, p. 577.</ref> The mines were subsequently used to defend German positions during the [[operation Overlord|Battle of Normandy]] and in the defense of Northern France and the German border. S-mines were typically used in combination with anti-tank mines to resist the advances of both [[Armoured warfare|armor]] and [[infantry]].<ref name="Sloan" /> The Allies removed an estimated 15,000 unexploded mines from dunes by [[Pouppeville]] after the initial invasion.<ref>p. 283.</ref>

The S-mine acquired its [[alliteration|alliterative]] nickname "Bouncing Betty" from American infantrymen.<ref>Ambrose, p. 281.</ref> The S-mine had a great psychological effect on Allied forces because of its tendency to maim, rather than kill, the infantryman. The German habit of laying the mines around anti-tank and anti-vehicle mines contributed to the reputation. If a vehicle was disabled by a mine, the soldiers would be trapped in it until someone came to rescue them.<ref>Alex Kershaw. ''The longest winter: the Battle of the Bulge and the epic story of WWII's Most Decorated Platoon.'' Cambridge, Ma. Da Capo Press 2004, {{ISBN|0-306-81304-1}}, pp. 21, 47.</ref> In particular, limbs and [[genitalia]] were the most vulnerable. In his book ''Mine Warfare on Land'', Lt. Col. Sloan described the S-mine as "probably the most feared device encountered by Allied troops in the war."<ref name="Sloan" /> Exact death tolls inflicted by the S-mine are not known. The Allies did not record whether a death was caused by a particular type of weapon, only whether or not the death occurred in the course of battle. Regardless, some unofficial assessments credit the S-mine with having caused significant casualties. The [[12th Infantry Regiment (United States)|12th Infantry Regiment]] at [[Utah Beach]] suffered what it termed as "light" casualties in the landing, most of which were caused by S-mines.<ref>Ambrose, p. 292.</ref>

S-mine production ceased after the end of World War II. No information has been discovered as to the exact fate of the remaining stockpiles of the S-mine, but it can be assumed a majority were destroyed as part of the disarmament of Germany after its surrender, although possibly some were preserved for study and [[reverse engineering]] by the Allies. Many direct imitations of the S-mine appeared in the years following World War II.

During the military occupation of Germany and the postwar rebuilding of Europe, the American [[United States Army Corps of Engineers|Army Corps of Engineers]], the newly established French government, and the British [[Ministry of Defence (United Kingdom)|Ministry of Defence]] engaged in one of the most prolonged and successful mine-clearing operations throughout Western Europe. France deployed a variety of personnel to undertake this task, including 49,000 German prisoners of war. This joint operation eliminated a majority of the remaining fields of mines on the war-torn western half of the continent and was greatly assisted by the German policy of clearly marking and accurately recording the locations of minefields.<ref name="Sloan" />

However, incidents involving accidental explosions of mines in North Africa, the former [[Warsaw Pact]] countries, France, and Germany still occur sporadically. North Africa and Eastern Europe have a particularly large amount of uncleared World War II-era minefields, lost in the desert sands or forgotten by authorities. While German documentation stated that the S-mine had an effective lifespan of two to seven years once planted, the explosive charge might still be operable in mines to this day.

== Characteristics ==
[[File:Schrapnel allemand.jpg|thumb|upright|S-mine in a museum]]
The German S-mine was a [[steel]] cylinder approximately {{convert|15|cm}} tall without its sensor and around {{convert|10|cm|in|0}} in diameter. A steel rod protruding from the mine's top held the main [[Fuze|fuse]], where its trigger or sensor was attached. The SMi-35 had a central fuse, while the SMi-44 had an offset fuse. It weighed approximately {{convert|4|kg}}, with the weight depending on whether it was loaded with the lighter powdered or the heavier poured [[trinitrotoluene|TNT]].<ref name="TM-E" />

The main charge of the mine used TNT as its explosive; the propelling charge was [[black powder]]. The standard pressure sensor used a [[percussion cap]] to ignite it.<ref name="FM" />

The main fuse was designed to delay the firing of the propelling charge for approximately four seconds after the mine was triggered. The explosion of the propelling charge sent the mine upwards into the air and activated three short-delay pellets between the propellant charge and the three detonators. These short-delay pellets delayed the mine's detonation long enough for it to reach an appropriate height before exploding.

The standard pressure sensor was designed to activate if depressed by a force equivalent to a weight of roughly {{convert|7|kg|lb|spell=in}} or greater. This ensured the mine was not detonated by wildlife or natural impact of blowing leaves, branches, or other normally occurring phenomena.<ref name="TM-E" />

== Usage ==
[[File:Bouncing-mine.svg|frame|Diagram of S-mine detonation]]

The S-mine was normally triggered by a three-pronged pressure fuse. It could also be modified to be triggered by a [[tripwire]]. A special tripwire adapter was provided by the German army. The steel tube that held the fuse was threaded to accept any standard German ignition or trigger, allowing the sensor to be removed and the mine to be deliberately triggered by a human operator.<ref name="TM-E" /> When triggered, the mine functioned in three stages (see diagram).

# First, the mine was fired {{convert|0.9|to|1.5|m|ft|0|sp=us}} upwards by a small propellant charge.
# Approximately a half-second later, the main charge [[detonate]]d at the optimum height to kill or severely injure anyone in the immediate area.
# The main charge of the mine was surrounded by roughly 360 steel balls, short steel rods, or scrap metal pieces. These became metal [[Fragmentation (weaponry)|shrapnel]] that sprayed horizontally from the mine at high velocity.

The time between triggering and ignition of the propelling charge varied between 3.9 and 4.5 seconds, depending on the age and condition of the mine. According to German documentation, the S-mine was lethal within {{convert|20|m|sp=us}} and could inflict [[Casualty (person)|casualties]] within {{convert|100|m|sp=us}}.<ref name="TM-E" /> American training manuals warned of casualties at up to {{convert|140|m|sp=us}}.<ref name="FM">US Army Field Manual FM 5-31, 1943.</ref>

A common misconception prevailed that the S-mine would not detonate until its victim stepped off the trigger. This fallacy was propagated by incorrect United States [[propaganda]] during World War II. The mine would detonate whether the trigger was released or not. Standing still or attempting to run from the S-mine would be equally dangerous. The most effective way to survive the mine's detonation would not be to flee but to fall to the ground lying face down as quickly as possible.

=== Armored vehicle discharger system ===
A S-mine mine launcher ("[[Minenabwurfvorrichtung]]" in German) in the form of angled tubes attached via brackets to the hull, were also used for anti-infantry defense by Wehrmacht armored vehicles. Early versions of the [[Tiger I]] were equipped with five such devices with command variants being equipped with four. Beginning in January 1943 all new Tiger Is were equipped with this system. These were removed in October 1943 and replaced in March 1944 by the [[Nahverteidigungswaffe]] or "close defense weapon" (full deployment was delayed due to production delays) which could launch anti-personnel grenades as well as smoke grenades or signal flares in all directions.<ref name="Tiger Tanks at War">{{cite book |last1=Green |first1=Michael |last2=Brown |first2=James D. |title=Tiger Tanks at War |url=https://books.google.com/books?id=S1gbrYELbT4C&q=pistol+port+tanks&pg=PA88 |publisher=Voyageur Press |pages=88 |language=en |date=15 February 2008|isbn=978-0-7603-3112-5 }}</ref>

== Detection and disarming ==
[[File:mine-detecting.jpg|thumb|An American paratrooper probes for mines using a knife.]]

The S-mine was constructed mostly of metal, so it could be easily detected by [[metal detector]]s. However, such expensive and bulky equipment was rarely available to infantry units and was prone to malfunction. The mine could also be detected through careful manual probing, a time-consuming process. Using a knife or a bayonet, an infantryman would probe at a low angle through the soil. It was important to probe at an angle that would not accidentally depress the pressure sensor.<ref name="FM" />

Once an S-mine was discovered, disarming it was fairly simple. To prevent triggering while the mine was being planted, the German pressure sensor featured a hole where a safety pin kept the sensor from being depressed. This pin was removed once the mine was planted. If the discovered mine was fitted with the pressure sensor, the disarming personnel would slip a pin (such as a sewing needle) into this hole. If the device was armed with a tripwire or electrical trigger, this could simply be cut. Germans were known to use [[booby trap]]s to discourage this, so caution was suggested. The mine could then be removed carefully from the ground and the sensor easily unscrewed. If it was deemed necessary to render the mine completely inert, three plugs on the top granted access to the three detonators inside the mine. These could be unscrewed and the detonators removed.<ref name="FM" />

== Internal components ==
The following diagrams show the SMi-35 mine's internal mechanism, together with the three-pronged pressure fuse. The safety pin for the fuse and the three removable plugs for the detonators are clearly visible. These diagrams were issued as part of a US Army field manual on mines in 1943.

{{center|
[[File:smine-diagram.jpg|Mine body]]
[[File:smine-sensor.jpg|Mine fuse]]
}}

== Imitations ==
[[File:M16a2mine.png|thumb|Cutaway American [[M16 mine|M16A2]] Bounding Mine, developed from the S-mine]]

The S-mine was an extremely successful design. Bouncing mines based on its design were introduced by other countries.

The Finnish army began purchasing the SMi-35 model S-mine from Germany following the [[Winter War]]. This was part of a larger military assistance agreement between the two nations. Finnish forces experienced great success with the S-mine, but its monetary cost was considerable. During the [[Continuation War]], the Finns unsuccessfully attempted to produce their own version of the mine.<ref name="JTV" /> The Finnish nickname for the mine was ''Hyppy-Heikki'' ("Hopping Henry").

The French [[Mle 1939 mine]] was inspired by the success of the S-mine. In 1940, Major Pierre (also cited as Paul) Delalande of the French Corps of Engineers managed to escape the German conquest of his country and reached the United States with the Mle-1939 plans. These plans led to the development of the American [[M2 mine]], which was fielded in 1942 but proved deficient in combat.<ref name="Ingraham" /> The American army was impressed by the S-mine's role in thwarting the French offensive in the German [[Saarland|Saar]] region at the beginning of World War II and continued further work on bounding mines. After the war, the American army developed their [[M16 mine]] directly from captured S-mine designs.<ref name="Ingraham" />

The [[Soviet Union]] also based the design of its [[OZM]] series of mines on the German S-mine. Soviet mines tended to be far simpler internally; instead of being filled with steel balls or scrap metal, the OZM-4 mine was given a solid cast-iron body that would fragment on its own. Later, the OZM-72 bounding mine was filled with steel rods, returning to the original concept of the S-mine. Both of these mines are still being produced by Russia.

[[Yugoslavia]] also built a [[PROM-1]] [[bounding mine|bounding]] type of [[anti-personnel mine]] loosely based on the S-mine. The mine was widely used during the [[Croatian War of Independence]] by both sides. The mine was also found in [[Bosnia and Herzegovina|Bosnia]], Chile, [[Eritrea]], [[Iraq]], [[Kosovo]], [[Mozambique]] and [[Namibia]].

Other nations that have produced S-mine-inspired designs include the [[People's Republic of China]], Sweden (called Truppmina 11), and Italy. The use of mines remains a controversial issue to this day. Antipersonnel mines like the S-mine have been the subject of repeated treaties and human-rights objections. Their use is the subject of extensive international debate.

== References ==
{{reflist|2}}

== Further reading ==
*[http://feldbluse.ld.infoseek.co.jp/a-032.html STEINER: SMi-35] {{Webarchive|url=https://web.archive.org/web/20080104112103/http://feldbluse.ld.infoseek.co.jp/a-032.html |date=2008-01-04 }} - Japanese website featuring US military images and diagrams of the SMi-35
*[http://www.custermen.com/ItalyWW2/Weapons.htm Weapons of the Italian Campaign] – Details the use of the S-mine and other weapons during the Allied liberation of Italy

{{WWIIGermanMines}}

[[Category:Anti-personnel mines]]
[[Category:World War II infantry weapons of Germany]]
[[Category:Land mines of Germany]]
[[Category:Military equipment introduced in the 1930s]]

S-mine - Bewerkingsoverzicht

Colani: Tekst vervangen - ".JPG" door ".jpg"